Skip to content
audiokyanSTUDIO
—
Home › Audio Tools › Bass Booster

Bass Booster

Add deep, punchy bass to any track — with optional harmonics for small speakers.

About the Bass Booster

Bass gives music weight and energy, but many tracks sound thin on laptops, earbuds and phone speakers. The bass booster raises the low end with a low-shelf equalizer, can add harmonic overtones so bass is audible even on small speakers, and filters inaudible sub-sonic rumble so your headroom is not wasted.

How to use the Bass Booster

  1. Load a track and play it so you know how it sounds before processing.
  2. Choose the bass cutoff: 80–120 Hz is a good starting point for most music; go higher for fuller, warmer bass.
  3. Raise the bass boost in small steps (4–8 dB is usually plenty). Leave the soft limiter on to avoid clipping.
  4. Enable Add harmonics if you listen on phone or laptop speakers, then click Apply bass boost, compare with the original and download.

Supported formats and limits

Input: any audio your browser can decode — commonly MP3, WAV, M4A/AAC, OGG, Opus and FLAC, plus the audio track of MP4/MOV. Output: WAV (lossless) or MP3 (128–320 kbps). There is no upload limit because files never leave your device; the practical limit is your device's memory.

Tips for best results

  • Small speakers cannot reproduce very low notes, so harmonics often make bass seem louder than raw boost does.
  • Too much boost can make a mix muddy and use up headroom; reduce the boost if the peak chip turns amber.
  • Keep the 30 Hz rumble filter on unless you specifically need sub-bass content.

Privacy and limitations

All processing happens locally in your browser, so your audio is never uploaded. Boosting bass cannot create low frequencies that were never recorded, and strong boosts on already bass-heavy tracks can cause distortion or speaker strain. Increase gradually. Please only process audio you own or have permission to use — see our Terms of Service and Disclaimer.

Frequently asked questions

How much bass boost should I use?

Start with 4–6 dB. Above about 10 dB most tracks become boomy and lose clarity.

What do the harmonics do?

They add overtones above the fundamental bass note, which your ear uses to infer the low note even when a small speaker cannot play it.

Will it make my track clip?

The soft limiter rounds off loud peaks so strong boosts stay clean. Check the peak chip in the result.

Learn more

Related tools

0:00.000 / 0:00.000
audiokyan · Web Audio engine
SpaceplayStandby