About the Audio Volume Booster
Quiet recordings are hard to hear and easy to ignore. The volume booster applies precise gain in decibels and, optionally, a soft limiter that gently rounds off peaks instead of letting them clip into harsh distortion.
How to use the Audio Volume Booster
- Load your audio and read the Source peak and Headroom chips to see how loud it already is.
- Choose a gain from −24 dB to +24 dB, or click Normalize to −1 dB for the maximum clean boost.
- Keep the soft limiter on for loud material; turn it off only if you want a purely linear change.
- Click Apply gain, compare with the original, then download.
Supported formats and limits
Input: any audio your browser can decode — commonly MP3, WAV, M4A/AAC, OGG, Opus and FLAC, plus the audio track of MP4/MOV. Output: WAV (lossless) or MP3 (128–320 kbps). There is no upload limit because files never leave your device; the practical limit is your device's memory.
Tips for best results
- +6 dB roughly doubles the amplitude; +3 dB is a clearly audible but gentle lift.
- If the peak chip turns amber, the result is touching full scale — lower the gain a little.
- Boosting also boosts background noise, so reduce noise before amplifying if you can.
Privacy and limitations
All processing happens locally in your browser, so your audio is never uploaded. Gain cannot recover audio that was recorded too quietly or already distorted. Very heavy boosts will make noise more noticeable. Please only process audio you own or have permission to use — see our Terms of Service and Disclaimer.
Frequently asked questions
Why does boosted audio sometimes sound distorted?
When the signal is pushed beyond full scale it clips. The soft limiter and normalize function help prevent this.
What does normalize do?
It measures the loudest peak and sets the gain so that peak lands at −1 dBFS, leaving a little safety headroom.
Can I make audio quieter?
Yes, use a negative gain value.